Specifications of the wireless switch (small dot-free sticker)
● 1. Switch type: free to stick
● 2. Working frequency: 433MHz
● 3. Battery model: CR2032
● 4. Material: ABS+PC plastic
● 5. Code sending format: 1527 encoding format
● 6. Distance: indoor (20 meters), outdoor (50 meters / open space)
● 7. Color: gold, silver, white
● 8. Size: Diameter 5cm Thickness 1.5cm
Wireless Smart Receiver Specifications
● 1. Input power: AC90-250V 50/60Hz
● 2. Decoding method: MCU software decoding
● 3. Maximum current: 10A
● 4. Remote storage: 20pcs
● 5. Standby current:<5mA
● 6. Supported remote type: EV1527 learning code, fixed code
● 7. Total load power: <1000W
● 8. Working mode: inching, self-locking, interlocking, light on when an incoming call
● 9. RF frequency: 433MHz
● 10. Wiring method: fixed terminal
● 11. RF working mode: superheterodyne
● 12. Output wiring type: neutral wire, live wire
● 13. Receiving sensitivity: <-108dbm
● 14. Dimensions: 61*36.5*22mm(L,W,H)
● 15. Transmission distance: >50m (open space)
● 16. Colors: White, Black
● 17. Output type: 1-way relay switch signal, with load current less than 10A;
● 18. A variety of working modes: jog, self-locking, interlocking, delay-off (5 seconds, 10 seconds, 15 seconds, 20 seconds optional), light-on function when incoming calls;
"Instructions for use
● 1. Clear the code: (Before switching modes, you must clear the code first)
● 2. Press the learning code matching button 9 times and the LED will turn off. LED flashes 5 times, clear OK. (If you
● need to change the working mode of the same remote control, please clear the code first and then learn)
Learning to
● 1. Jog function:
● - Press the code-matching button on the control panel once, and the LED indicator will flash once. After the LED indicator lights up, press the remote control button that needs to be coded, and the LED indicator on the control panel will flash three times in a row to successfully code.
● 2.Self-locking function:
● - Press the code-matching button on the control panel twice in a row, and the LED indicator will flash once. After the LED indicator lights up, press the remote control button that needs to be coded, and the LED indicator on the control panel will flash three times in a row to successfully code.
● 3. Interlock function:
● - Press the code-matching button on the control panel three times in a row, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to be coded, and the LED indicator light on the control panel will flash three times in a row. Coding successful.
● 4. 5-second delay learning method:
● - Press the code-matching button on the control panel 4 times in a row, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to be coded. The LED indicator light on the control panel will flash 3 times in a row, indicating that the code matching is successful.
● 5. 10 seconds delay learning method:
● - Press the code-matching button on the control panel 5 times in a row, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to be coded. The LED indicator light on the control panel will flash 3 times in a row, indicating that the code matching is successful.
● 6. 15 seconds delay learning method:
● - Press the code-matching button on the control panel 6 times in a row, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to be coded. The LED indicator light on the control panel will flash 3 times in a row, indicating that the code matching is successful.
● 7. 20 seconds delay learning method:
● - Press the code-matching button on the control panel 7 times in a row, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to be coded. The LED indicator light on the control panel will flash 3 times in a row, indicating that the code matching is successful.
● 8. Power on and open function learning method:
● - Press the code-matching button on the control panel 8 times in a row, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to be coded. The LED indicator light on the control panel will flash 3 times in a row, indicating that the code matching is successful. (This function means that the relay automatically closes after power is turned on, also known as the function of turning on the lights when an incoming call comes in)
Precautions:
● 1. Do not operate with power on, you should turn off the power first to operate, and use it after the test is confirmed.
● 2. When the voltage of the remote control is insufficient, please replace the battery in time (when the voltage of the remote control battery is insufficient, the general remote control distance becomes closer).
Package Included:
● 1 x 433Mhz Receiver Module，
● 1 x Feel free to stick the remote control
