● 1:Powerful components(DC voltage:12V to 72V;Maximum current:30A): Remote control water heater \ Remote control LED \ Remote control Lamp \ Remote control water pump and other remote control device;
● 2:Control distance: up to 100m (theoretical distance)
● 3:Simple wiring: only input(V+/V-) and output (V+/V-)
● 4:Multiple matching methods :many remotes can control same receiver at the same time(at most 16pcs remotes)
● 5:The remote control is equipped with a hanging buckle, which can be hung on an object at will.
Operating Mode
Setting mode 1 Momentary mode :
● Press the learn button once time,
● Performance :
● Press and hold on one button -> the Electrical Equipment will turn ON;
● Release the button -> the Electrical Equipment will turn OFF;
Setting mode 2 Toggle mode :
● Press the learn button Twice time,
● Performance :
● Press one button -> the Electrical Equipment will turn ON;
● Press the button again-> the Electrical Equipment will turn OFF;
Setting mode 3 Latched mode :
● Press the learn button Three times,
● Performance :
● Press A button -> the Electrical Equipment will turn ON;
● Press B button -> the Electrical Equipment will turn OFF;
Set Up
Note: Before configuring the signal, Press the learning button 8 times , to reset the receiver.
● Setting mode 1 Momentary mode:
● STEP 1
● Press the learning button on the ReceiverOnce.
● Wait for a moment , the LED will turn on , indicating you entered the learning state.
● STEP 2
● Press one button on the Remote Control , the LED on the receiver board will flash on;
● Setting mode 2 Toggle mode:
● STEP 1
● Press the learning button on the Receiver Twice.
● Wait for a moment , the LED will turn on , indicating you entered the learning state.
● STEP 2
● Press one button on the Remote Control , the LED on the receiver board will flash on;
● Setting mode 3 Latched mode:
● STEP 1
● Press the learning button on the ReceiverThree times.
● Wait for a moment , the LED will turn on , indicating you entered the learning state.
● STEP 2
● Press A button on the Remote Control , the LED on the receiver board will flash on;
● STEP 3
● Press B button on the Remote Control , the LED on the receiver board will flash on;
Package Include
● 1 * RF receiver
● 1 * Remote
● 1 * English Manual
