Note 1:
1. The receiving supports fixed code 433 frequency: PT2260, PT2262, PT2264, EV1527.
2. Not support learning rolling code and dynamic code.
Product Introduction
1. Convert 433MHz RF Remote to App via WiFi
2. Make 433MHz RF devices App remote controllable
3. Support to add max. four 433MHz RF Remote/Curtain Switch/Alarm
4. Support to control up to sixteen 433MHz RF devices
5. Receive alarm push message from 433MHz PIR sensor, door &window alarm sensor
6. Control 433MHz RF devices over Wi-Fi or mobile network
7. Free iOS and Android mobile app eWeLink
8. Wide control range: To control the 433MHZ RF devices with 433MHZ RF Remote, you have to stay indoors. Sonoff RF Bridge helps to switch the signal, allowing you to control the 433MHZ RF devices from anywhere at any time
9. Easy management: one snoff RF supports up to four 1-4 button 433MHZ RF Remotes, allowing you to control max.16 RF devices on the APP, you can name each control button, just take out your phone, and tap to control.
10. Set times to open/close the curtain at a fixed time.
11. Quickly set up a home security system, Link with security equipment, and work as an alarm center
12. Anti-theft alarm push, Once infrared changes are detected, RF Bridge will push an alarm message to your smartphone
13. Fire alarm push: Indoor smoke concentration monitoring, RF Bridge will push an alarm message if there is a fire
Specifications:
1:Wide control range
2:Easy management
3:Set times to open/close the curtain at a fixed time.
4:Quickly set up a home security system
5:Link with security equipment, work as an alarm center
6:Anti-theft alarm push
7:Fire alarm push
8. Power Supply: USB 5V( not included)
9. Wireless Standard: WiFi 802.11b/g/n, 433MHz
10. Security Mechanism: WPA-PSK/WPA2-PSK
11. Product Dimensions: 62*62*20 (mm)/2.4*2.4*0.8inch
