✅ Specifications:
◉Temperature range :-50-110 °
◉Dimensions: 48.5 * 40mm
◉Temperature control mode: ON / OFF
◉Resolution:When temperature is0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
◉Control accuracy: 0.1 °
◉Hysteresis accuracy: 0.1°
◉Refresh rate: 0.5S
◉High temperature protection: 0-110°
◉Supply voltage: DC 12V
◉Static current: ≤ 35MA, attract current ≤ 65MA
◉Output voltage: DC 12V
◉Output power: 20A relay
◉Measurement input: NTC (10K 0.5%) Waterproof Sensor
◉Environmental requirements: -10 ~ 60 ° ,Humidity 20% -85%
✅ How to use:
◉Connect the power supply and the load, you can supply to the controller,
◉Is displayed as a measured temperature,
◉Press the SET button, the display flashes the temperature,
◉Press - to set the desired temperature,
◉After setting press SET to confirm return,
◉The controller automatically performs the relay by setting off!
◉Lights, LED status descriptions:
◉Indicator: Off The relay is switched off, Always indicate the relay is closed.
◉LED: Shows LL is the sensor open, showing ? ✅ Specifications:
◉Temperature range :-50-110 °
◉Dimensions: 48.5 * 40mm
◉Temperature control mode: ON / OFF
◉Resolution:When temperature is0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
◉Control accuracy: 0.1 °
◉Hysteresis accuracy: 0.1°
◉Refresh rate: 0.5S
◉High temperature protection: 0-110°
◉Supply voltage: DC 12V
◉Static current: ≤ 35MA, attract current ≤ 65MA
◉Output voltage: DC 12V
◉Output power: 20A relay
◉Measurement input: NTC (10K 0.5%) Waterproof Sensor
◉Environmental requirements: -10 ~ 60 ° ,Humidity 20% -85%
✅ How to use:
◉Connect the power supply and the load, you can supply to the controller,
◉Is displayed as a measured temperature,
◉Press the SET button, the display flashes the temperature,
◉Press - to set the desired temperature,
◉After setting press SET to confirm return,
◉The controller automatically performs the relay by setting off!
◉Lights, LED status descriptions:
◉Indicator: Off The relay is switched off, Always indicate the relay is closed.
◉LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
✅ Package Included:
◉1 x -50-110°C Digital thermostat Temperature Control Switch 12V + sensor
HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
✅ Package Included:
◉1 x -50-110°C Digital thermostat Temperature Control Switch 12V + sensor
