1. It is 433mhz and uses a special code. The wall switch cannot work with other receivers. It can work with this receiver only.
2. It is a kinetic switch, no battery is needed. The receiver will catch the signal and work whenever you press the wall switch button.
3. The receiver has a fuse, for safety.
4. One receiver can only be controlled by 3pcs wall switches.
5. How to connect: The input and output power cannot be reversed. The power should be AC 110-230V
Highlights:
1. Kinetic No battery Need Wall Switch
(a). --You do not need to buy a battery anymore. Save cost and better for the environment.
(b). --Energy cycle, Converting kinetic energy to electrical energy.
2. The receiver has a fuse, more safety(F10AL250V)
(a). --When your electrical appliances are short-circuited or the voltage is too high, this fuse will automatically break, and then cut off the power to protect your electrical appliances and life safety;
(b). --You only need to replace another fuse, and the receiver can continue to use it.
3. Strong rf signal
(a). --Can pass walls, the longer the distance, the signal weaker
4. Family Control
(a). --One 2-button wall switch can control two receivers at the same time.
(b). --One receiver can be controlled by almost 3pcs wall switches.
5. Waterproof
(a). --You can use it in bathroom or kitchen
Product Application Area
1. Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on
2. Remote control Electric curtain \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
3. Remote control humidifiers, microwaves, coffee machines
4. Remote control Taking Care of the elderly, children
How to set up
Please connect with power first.
1. Press and hold the receiver learning button for about3-5 seconds, you will see the blue indication light, release
2. Press the wall switch button twice, the indication will blink twice,
3. Press the receiver learning button once.
4. success.
Relay Receiver Board Parameter
1. Working voltage: AC 110V~230V
2. Max current: 10A
3. Max load: 2200W
4. RF frequency: 433MHz
5. Working temperature: -10~+50
6. Receiving Sensitivity : >97dbm
7. Amount of storage remote controls : 3 pieces
8. Support encoding: 1527 Leaning code
9. RF Operating mode: ASK/FSK
10. Receiving range: indoor(up to 30m)/ outdoor(up to 100m)
11. Type of Fuse: F10AL250V
12. Size:60*42*28mm
Self-Powered Wall Switch Transmitter Parameter
1. RF frequency: 433MHz
2. Size: 86*86*mm
3. Battery: No Battery Needs
4. Remote distance: up to 50m (theoretical distance)
5. Screw: Include
6. double-sided tape: Include
